+39 085 8562076 / +39 085 8121061 Via Teramo 11, 65024 Manoppello (PE), Italy
SD ORBIT FULL/SPRAY
SD ORBIT FULL/SPRAY
SD Orbit series

SD ORBIT FULL/SPRAY

Single-brush with a sturdy frame characterized by a roto-orbital movement that elevates the washing action ideal for an intense and delicate cleaning. Also available in SPRAY version.

SD SD ORBIT is an innovative single brush with a sturdy and compact frame characterized by a roto-orbital movement that allows an increase in the work yield, increasing the washing action compared to a traditional single brush, for an intense and delicate cleaning.

This movement takes advantage of high frequency oscillations that give the machine excellent stability and manoeuvrability, allowing the operator to be used without excessive effort and without the need for specific training.

FEATURES
SD ORBIT FULL/SPRAY

Features

Variable Speed (VS)
  • Models with variable speed (VS) presents a motor rpm’s speed adjuster (variable speed) and it is suitable for those who need to prepare different type of floors. 
  • When grinding concrete, a specific speed is needed, which is different from the marble’s one. Instead, for floor’s preparation, there is the need of a minimum speed so that the tools will not be used in vane. 
  • Moreover, the variable speed allows to adjust the motor rpm depending on the floor’s irregularity.
  • On a marble’s floor where  the marble was not well placed, vibrations can be greatly reduced by acting on the motor’s rpm.

Use
  • The rotating movement of the disc and the orbiting movement work in synergy. Each contact with the surface creates rotational movements with a diameter of 1cm, with a number equal to 1400 rotations per minute.
  • SD ORBIT uses 1/10 of water compared to a traditional single-disc brush and consequently the chemical consumption is reduced, because it is constantly kept within the area of the disk by orbital movement and is not dispersed outwards.
  • Recommended for use with the TRAXOPAD or MARBLELUX line of diamond pads for micro-polishing worn natural stone and marble floors.
  • Quick release of the base from the handle and the electric box to facilitate transport.
  • Additional socket for connecting accessories.

Strong points
  • Easy to handle: thanks to the large solid rubber wheels, only one operator is able to go up and down the stairs in total autonomy, with minimal effort.
  • Safe: compared to a traditional single brush the oscillation of the plate excludes any type of danger during processing, preventing the power cord from getting tangled to the brush and the machine to depart from the side, that could cause walls or obstacles to hit, resulting in damage.
  • Dismountable: thanks to the quick release, the machine can be disassembled into three different components in just two minutes. The motor head (25kg), handle frame (20kg) and weight (20kg) can be easily loaded by just one person.
  • Handy: very easy to use for a whole day thanks to its anti-vibration system
  • Transportable: thanks to the practical quick disassembly system, the machine can be stored very easily.


VERSIONI
SD ORBIT FULL/SPRAY

Versioni

SD ORBIT FULL: cod. SDORBITFULLLMA

SD ORBIT FULL

Professional orbitant single-brush machine with a weight of 84kg. Dismountable and easy to carry without a second operator. It easily adapts to different materials. 3HP 1800W single-phase fixed speed motor.

Includes: SD ORBIT base with quick release system + electrical cable release + lifting handle + 9.8kg extra weight + pad holder + 10mt power cable + tank + user manual

Included tools
TANK 15lt
WEIGHT KIT 17KG for SD ORBIT
LIFTING GRIP KIT M6 for ORBITOP-GREEN MACHINE-SD ORBIT-SD TRIAL-MAXIMONSTER
CABLE WITH EU SCHUKO PLUG FOR SINGLE-DISC MACHINES SERIES
PAD HOLDER 5 HOLES for SD ORBIT
Quick-release kit

Tipi di Superficie
#Bordo piscina#Pavimenti domestici#Pavimento civile#Piccoli spazi
Tipi di Trattamento
#Cristallizzare#Decerare#Lavare#Lucidare#Microlevigare#Pulire#Sgrossare
Settore di appartenenza
#Hotel #Bar#Imprese di pulizia#Privato
Esigenze di lavoro
#Macchina smontabile#Manico reclinabile#Lavorazione con rotorbitale#Manovrabilità della macchina
Ampiezza della superficie
#Media (da 100 a 1000mq)#Piccola (fino a 100mq)
SD ORBIT FULL SPRAY: cod. SD0S1701F

SD ORBIT FULL SPRAY

Includes: SD ORBIT base with quick release system + electrical cable release + lifting handle + 9.8kg extra weight + pad holder 17” + 10mt power cable + tank with pump + two spray nozzles + user manual

Included tools
TANK 15lt
WEIGHT KIT 17KG for SD ORBIT
LIFTING GRIP KIT M6 for ORBITOP-GREEN MACHINE-SD ORBIT-SD TRIAL-MAXIMONSTER
CABLE WITH EU SCHUKO PLUG FOR SINGLE-DISC MACHINES SERIES
PAD HOLDER 5 HOLES for SD ORBIT
GRUPPO SPRAY
Quick-release kit

Esigenze di lavoro
#Lavaggio Moquette e tappeti#Macchina smontabile#Manico reclinabile#Lavorazione con rotorbitale#Manovrabilità della macchina
Tipi di Superficie
#Bordo piscina#Pavimenti domestici#Pavimento civile#Piccoli spazi
Tipi di Trattamento
#Cristallizzare#Decerare#Lavare#Lucidare#Microlevigare#Pulire#Sgrossare
Settore di appartenenza
#Hotel #Bar#Imprese di pulizia#Privato
Ampiezza della superficie
#Media (da 100 a 1000mq)#Piccola (fino a 100mq)
DATI TECNICI
SD ORBIT FULL/SPRAY

DATI TECNICI

Technical datas
    CARATTERISTICA TECNICA SD ORBIT FULLSD ORBIT FULL SPRAY
    CODICE MACCHINASDORBITFULLLMASD0S1701F
    POWER [W-Hp]max1100-1Hp1100-1Hp
    POWER SUPPLY [V-Hz]230/50-60230/50-60
    AMPERAGE [A]44
    N° OSCILLATION PER MINUTE [N]14001400
    HAND VIBRATION LEVEL [rpm]2.712.71
    WORKING WIDTH [mm]430430
    DIMENSIONS [mm]700x495x1220700x495x1220
    WEIGHT [Kg]8485
GALLERIA DETTAGLI
SD ORBIT FULL/SPRAY

Galleria Dettagli

ACCESSORI
SD ORBIT FULL/SPRAY

Accessori

Cables
»
CABLE WITH EU SCHUKO PLUG FOR SINGLE-DISC MACHINES SERIES

cod: AC0056
CABLE WITH EU SCHUKO PLUG FOR SINGLE-DISC MACHINES SERIES

Extra weights
»
WEIGHT KIT 17KG for SD ORBIT

cod: T0450-P-004-02
WEIGHT KIT 17KG for SD ORBIT

Handle Grips
»
LIFTING GRIP KIT M6 for ORBITOP-GREEN MACHINE-SD ORBIT-SD TRIAL-MAXIMONSTER

cod: ACDC106
LIFTING GRIP KIT M6 for ORBITOP-GREEN MACHINE-SD ORBIT-SD TRIAL-MAXIMONSTER

Handles
»

cod: AC0121
STANDARD SINGLE-DISC HANDLE for MONSTERMACHINE/GREEN MACHINE/SD ORBIT SERIES
Handle complete with front and rear shell, aluminum handle and tubular joint.

Pad holders
»
PAD HOLDER 5 HOLES for SD ORBIT

cod: AC0104
PAD HOLDER 5 HOLES for SD ORBIT
This Velcro pad holder allows cleaning and polishing with traditional abrasive and diamond pads.

»
SANDPAPER PAD HOLDER for SD ORBIT

cod: AC0108
SANDPAPER PAD HOLDER for SD ORBIT

»
STEEL WOOL PAD HOLDER for SD ORBIT

cod: AC0107
STEEL WOOL PAD HOLDER for SD ORBIT
Embossed pad holder to be used with steel wool used for crystallization.

Satellite Plates
»
FIX PLATE Ø17" for SD ORBIT 3x100B

cod: AC0109
FIX PLATE Ø17" for SD ORBIT 3x100B
Special tool holder Ø17" - 430mm with 3 fixed tool holders Ø100mm B attachment.
It suits all single-disc models, you can use diamond discs for grinding and polishing.

»
FIX PLATE Ø17" per SD ORBIT 3x140B

cod: AC0016
FIX PLATE Ø17" per SD ORBIT 3x140B
Special tool holder Ø17" - 430mm with 3 fixed tool holders Ø140mm B attachment.
It suits all single-disc models, you can use diamond discs for grinding and polishing.

»
HOOKY PLATE Ø17" for SD ORBIT 3x100 B

cod: AC0110
HOOKY PLATE Ø17" for SD ORBIT 3x100 B
Special plate with 3 male velcro discs of Ø100mm. It suits all orbital single-disc machines, you can use diamond discs or sandpaper with velcro, for grinding stone and ceramic floors or parquet.
With 3 tool holders Ø100mm - 4" B , VEL attachment.

»
HOOKY PLATE Ø17" for SD ORBIT 3x140 B

cod: AC0032
HOOKY PLATE Ø17" for SD ORBIT 3x140 B
Special plate with 3 male velcro discs of Ø140mm. It suits all orbital single-disc machines, you can use diamond discs or sandpaper with velcro, for grinding stone and ceramic floors or parquet.
With 3 tool holders Ø140mm - 4"B , VEL attachment.

Splash-guard bands
»
SPLASH-GUARD BAND for SD ORBIT

cod: AC0116
SPLASH-GUARD BAND for SD ORBIT
Splash-guard band for SD ORBIT single-disc machine.

Spray Kit
»
GRUPPO SPRAY

cod: ACDC073
GRUPPO SPRAY
Gruppo spray due ugelli per orbitale 230V

Water tanks
»
TANK 15lt

cod: AC0114
TANK 15lt
For SD 13, SD 17, SD GREEN machines

PRODOTTI IN KIT
SD ORBIT FULL/SPRAY

Prodotti in Kit

Kit in scatola
»
KIT R 1-2-3-LUX SPECIAL Ø100 B
Serie Dischi Diamantati Resinoidi/Per Multimateriale

cod: 100RSPKIT
KIT R 1-2-3-LUX SPECIAL Ø100 B
Kit di dischi diamantati resinoidi in grado di rimuovere stucchi cementizi a spessore e mastici di microspessori. Comprende gli step R1, R2, R3, R LUX (solo per il trattamento di marmi e terrazzi in sostituzione della polvere diamantata POWDY SHINE).

»
KIT R 1-2-3-LUX SPECIAL Ø100mm VEL
Serie Dischi Diamantati Resinoidi/Per Multimateriale

cod: 100RSPKITVEL
KIT R 1-2-3-LUX SPECIAL Ø100mm VEL
Kit di dischi diamantati resinoidi in grado di rimuovere stucchi cementizi a spessore e mastici di microspessori. Comprende gli step R1, R2, R3, R LUX (solo per il trattamento di marmi e terrazzi in sostituzione della polvere diamantata POWDY SHINE).

»
KIT R 1-2-3-LUX SPECIAL Ø140mm B
Serie Dischi Diamantati Resinoidi/Per Multimateriale

cod: 140RSPKIT
KIT R 1-2-3-LUX SPECIAL Ø140mm B
Kit di dischi diamantati resinoidi in grado di rimuovere stucchi cementizi a spessore e mastici di microspessori. Comprende gli step R1, R2, R3, R LUX (solo per il trattamento di marmi e terrazzi in sostituzione della polvere diamantata POWDY SHINE).

»
KIT R 1-2-3-LUX SPECIAL Ø140mm VEL
Serie Dischi Diamantati Resinoidi/Per Multimateriale

cod: 140RSPKITVEL
KIT R 1-2-3-LUX SPECIAL Ø140mm VEL
Kit di dischi diamantati resinoidi con formula innovativa e unica per utilizzo su pavimentazioni in marmo, cemento, granito, terrazzo di diametro Ø140mm, attacco VELCRO.

Include gli step: 3pz R1 SPECIAL, 3pz R2 SPECIAL, 3pz R3 SPECIAL.
Include anche lo step 3pz R LUX SPECIAL da utilizzare SOLO su pavimenti in marmo e terrazzo in sostituzione della polvere diamantata POWDY SHINE.

Per rimozione di stucchi cementizi a spessore e mastici di microspessori, rimozione graffi e preparazione di pavimentazioni in marmo, granito, cemento, terrazzo e pietre naturali senza l'utilizzo di polveri lucidanti.

Sostituiscono la lucidatura tradizionale meccanica.
Ideali per levigare in pochi passaggi e rimuovere stucco e mastici. Lasciano una finitura semilucida o lucida in base al numero dei passaggi.

Da usare con piatto portadiamante Ø140mm B, piatto trascinatore velcro Ø140mm e Gear Plate Ø140mm attacco B, 3 pezzi necessari.

UTENSILI
SD ORBIT FULL/SPRAY

Utensili

Abrasive PADS
»
ABRASIVE DISC 17" - Ø430mm
Multimaterial/ABRASIVE DISC Series

cod: 430WHITE1
ABRASIVE DISC 17" - Ø430mm
Abrasive disc Ø430mm for different uses:

WHITE-Washing: Soft pad suitable for polishing and ordinary cleaning of standard floors;

RED-Soft cleaning: Semi-soft pad suitable for cleaning of terracotta and klinker floors;

GREEN-Unwaxing: Medium aggressive pad suitable for unwaxing and deep cleaning of pvc and marble floors;

BROWN-Deep cleaning: highly aggressive pad suitable for removing greasy dirt. Ideal used with acid chemicals products;

BLACK-Persistent dirt: highly aggressive pad.
- diametro: Ø430[mm]

#Lavare#Lucidare#Pulire#Cemento#Granito#Gres #Ceramica#Linoleum#Marmo#Terrazzo #Graniglia

»
MELAMINE PAD GREY 17" - Ø430mm
Multimaterial/MELAMINE PADS Series

cod: 430MEL1G
MELAMINE PAD GREY 17" - Ø430mm
Pad suitable for washing gres from persistent dirt.
It is developed for cleaning and maintenance workings of hard floors.It is composed by a melamine foam that creates a structure for an efficient cleaning with high capacity to absorb dirt.
The high cleaning power of melamine significantly reduces the use of chemicals.
It is efficient for cleaning ceramic, gres and vinyl.
- diametro: Ø430[mm]

#Lavare#Lucidare#Pulire#Cemento#Granito#Gres #Ceramica#Linoleum#Marmo#Terrazzo #Graniglia

»
MELAMINE PAD WHITE 17" - Ø430mm
Multimaterial/MELAMINE PADS Series

cod: 430MEL1
MELAMINE PAD WHITE 17" - Ø430mm
Pad suitable for washing gres, ceramic and vinyl.
It is developed for cleaning and maintenance workings of hard floors.It is composed by a melamine foam that creates a structure for an efficient cleaning with high capacity to absorb dirt.
The high cleaning power of melamine significantly reduces the use of chemicals.
It is efficient for cleaning ceramic, gres and vinyl.
- diametro: Ø430[mm]

#Lavare#Lucidare#Pulire#Cemento#Granito#Gres #Ceramica#Linoleum#Marmo#Terrazzo #Graniglia

»
MICROFIBER PAD for MOQUETTE Ø430mm
Multimaterial/MICROFIBER PAD Series

cod: 444830
MICROFIBER PAD for MOQUETTE Ø430mm
Microfiber disc for carpeting, double-sided with abrasive strips, suitable for carpeting and carpet washing.
- diametro: Ø430[mm]

#Lavare#Lucidare#Pulire#Cemento#Granito#Gres #Ceramica#Linoleum#Marmo#Terrazzo #Graniglia

»
NATURE PAD 17" - Ø430mm
Multimaterial/NATURE PAD Series

cod: 430NATURE1
NATURE PAD 17" - Ø430mm
Natural fiber pad designed for polishing with powders and creams marble and granite floors
Also ideal for polishing with POWDY SHINE

#Lavare#Lucidare#Pulire#Cemento#Granito#Gres #Ceramica#Marmo#Terrazzo #Graniglia

»
STEEL WOOL STH PAD Ø430mm
Multimaterial/STEEL WOOL STH Series

STEEL WOOL STH PAD Ø430mm
Ideal pad for marble and granite crystallization.
Available in two types: fine and medium
- diametro: Ø430[mm]

#Lavare#Lucidare#Pulire#Granito#Marmo#Terrazzo #Graniglia

Abrasive Sandpaper Discs
»
SANDPAPER Ø140mm 25pcs
For Wood/SANDPAPER BOX Series

cod: 140CV024
SANDPAPER Ø140mm 25pcs
Pack of 25 abrasive sandpaper discs Ø140mm.
- diametro: Ø140[mm]
- tipo di attacco: CARTA VETRATA

#Carteggiare#Levigare#Legno#Resina

»
SANDPAPER Ø140mm 50pcs
For Wood/SANDPAPER BOX Series

cod: 140CV040
SANDPAPER Ø140mm 50pcs
Pack of 50 abrasive sandpaper discs Ø140mm.
- diametro: Ø140[mm]
- tipo di attacco: CARTA VETRATA

#Carteggiare#Levigare#Legno#Resina

»
SANDPAPER Ø425mm
For Wood/SANDPAPER series

cod: 400CV016
SANDPAPER Ø425mm
Sandpaper abrasive disc diameter Ø425mm for grinding wood or epoxy floors.

Available grits: 16, 24, 36, 60, 80, 100 and 120.
- diametro: Ø425[mm]
- tipo di attacco: CARTA VETRATA

#Carteggiare#Levigare#Legno#Resina

Abrasive Synthetic Discs
»
LITHOLUX 2
Per Marmo/Serie LITHOLUX M

cod: 100LITHM2
LITHOLUX 2
Disco abrasivo in magnesite di diametro Ø100mm, attacco di tipo B.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Marmo

»
LITHOLUX M Ø140mm B
Per Marmo/Serie LITHOLUX M

cod: 140LITHM2
LITHOLUX M Ø140mm B
Disco abrasivo sintetico per marmo di diametro Ø140mm, attacco di tipo B.

Da utilizzare nella fase di rimozione mastice o su pavimenti come il cotto.
Disponibile nelle grane: 36-60-120-220.

Suggerito uso con Gear Plate, Fix Plate e Free Plate.
- diametro: Ø140[mm]

#Levigare#Marmo

Mesh Abrasive Discs
Metal-Bond Diamond Discs
»
MCA Ø100mm B 5 SEGMENTS
For Concrete/Serie MCA per Cemento Abrasivo

cod: 100MCA00B
MCA Ø100mm B 5 SEGMENTS
Metal-bond diamond disc diameter Ø100mm, B attachment, 5 segments.

Grits available: 000,00,0,1,2

For grinding abrasive concrete floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCA Ø140mm B 6 SEGMENTS
For Concrete/Serie MCA per Cemento Abrasivo

cod: 140MCA00B
MCA Ø140mm B 6 SEGMENTS
Metal-bond diamond disc diameter Ø140mm, B attachment, 6 segments.

Grits available: 000,00,0,1,2

For grinding abrasive concrete floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCD Ø100mm B 4 SEGMENTS
For Concrete/Serie MCD per Cemento Duro

cod: 100MCD00B
MCD Ø100mm B 4 SEGMENTS
Metal-bond diamond disc diameter Ø100mm, B attachment, 4 segments.

Grits available: 000,00,0,1,2

For grinding hard concrete floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCD Ø140mm B 4 SEGMENTS
For Concrete/Serie MCD per Cemento Duro

cod: 140MCD000B
MCD Ø140mm B 4 SEGMENTS
Metal-bond diamond disc diameter Ø140mm, B attachment, 4 segments.

Grits available: 000,00,0,1,2

For grinding hard concrete floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCS Ø100mm B 4 SEGMENTS
For Concrete/Serie MCSA per Cemento SuperAbrasivo

cod: 100MCS00B
MCS Ø100mm B 4 SEGMENTS
Metal-bond diamond disc diameter Ø100mm, B attachment, 4 segments.

Grits available: 000,00,0,1,2

For grinding standard concrete floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCS Ø140mm B 5 SEGMENTS
For Concrete/Serie MCSA per Cemento SuperAbrasivo

cod: 140MCS00B
MCS Ø140mm B 5 SEGMENTS
Metal-bond diamond disc diameter Ø140mm, B attachment, 5 segments.

Grits available: 000,00,0,1,2

For grinding standard concrete floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCSA Ø100mm B 5 SEGMENTS
For Concrete/Serie MCSA per Cemento SuperAbrasivo

MCSA Ø100mm B 5 SEGMENTS
Metal-bond diamond disc diameter Ø100mm, B attachment, 5 segments.

Available in grits: 00, 0, 1, 2.

For grinding super abrasive concrete floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCSA Ø140mm B 5 SEGMENTS
For Concrete/Serie MCSA per Cemento SuperAbrasivo

cod: 140MCSA00B
MCSA Ø140mm B 5 SEGMENTS
Metal-bond diamond disc, Ø140mm, B attachment 5-segments

Available in grain 00,0,1,2.

For grinding super abrasive concrete floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MCSA00 Ø100mm B 5 SEGMENTS
For Concrete/For Concrete

cod: 100MCSA00B6S
MCSA00 Ø100mm B 5 SEGMENTS
Diamond disc, Ø100mm, 5-segments B attachment

Available in grain 00,0,1,2.

For grinding super abrasive concrete floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MG Ø100mm B 6 SEGMENTS
For Granite-Gres/For Granite-Gres

cod: 100MG00B6S
MG Ø100mm B 6 SEGMENTS
Metal-bond diamond discs, diameter Ø100mm, B attachment, 6 SEGMENTS

Available grits: 00,0,1,2.

For grinding granite floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Granito#Gres #Ceramica#Porfido

»
MG Ø140mm B 7 SEGMENTS
For Granite-Gres/For Granite-Gres

cod: 140MG0B
MG Ø140mm B 7 SEGMENTS
Metal-bond diamond discs, diameter Ø140mm, B attachment, 7 SEGMENTS

Available grits: 00,0,1,2.

For grinding granite floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Granito#Gres #Ceramica#Porfido

»
MM Ø100mm B 7 SEGMENTS
For Marble/For Marble

cod: 100MM00B
MM Ø100mm B 7 SEGMENTS
Metal-bond diamond disc, diameter Ø100mm, B attachment, 7 segments.

Available grits: 00,0,1,2.

For grinding marble floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Marmo

»
MM Ø140mm B 8 SEGMENTS
For Marble/For Marble

cod: 140MM00B
MM Ø140mm B 8 SEGMENTS
Metal-bond diamond disc, diameter Ø140mm, B attachment, 8 segments.

Available grits: 00,0,1,2.

For grinding marble floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Marmo

»
MP Ø100mm VEL
Multimaterial/Multimaterial

cod: 100MP1VEL
MP Ø100mm VEL
Diamond disc, diameter Ø100mm, VELCRO backed.

Available grits: 0 (30/40) - 1 (70/80) - 2 (120/150) - 3 (150/200).

These diamonds are used to avoid the classic diamond abrasive steps during the mastic removal phase on concrete, marble and self-levelling floors.
The grinding times will be shortened and faster.

FIELDS OF APPLICATION: marble, concrete, terrace, self-levelling.
- diametro: Ø100[mm]
- tipo di attacco: VELCRO

#Levigare#Sgrossare

»
MP Ø140mm VEL
Multimaterial/Multimaterial

cod: 140MP1VEL
MP Ø140mm VEL
Diamond disc, diameter Ø140mm, VELCRO backed.

Available grits: 0 (30/40) - 1 (70/80) - 2 (120/150) - 3 (150/200).

These diamonds are used to avoid the classic diamond abrasive steps during the mastic removal phase on concrete, marble and self-levelling floors.
The grinding times will be shortened and faster.

FIELDS OF APPLICATION: marble, concrete, terrace, self-levelling.
- diametro: Ø140[mm]
- tipo di attacco: VELCRO

#Levigare#Sgrossare

»
MSA Ø100mm B 5 SEGMENTS
For Concrete/Serie MCSA per Cemento SuperAbrasivo

cod: 100MSA000B
MSA Ø100mm B 5 SEGMENTS
Metal-bond diamond disc, Ø100mm, 5-segments B attachment

Available grits: 000, 00, 0, 1, 2.

For floor preparation and grouting of very abrasive concrete floors and for glues removal.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MSA Ø140mm B 6 SEGMENTS
For Concrete/Serie MCSA per Cemento SuperAbrasivo

cod: 140MSA000B
MSA Ø140mm B 6 SEGMENTS
Metal-bond diamond disc, Ø140mm, 6 segments B attachment

Available grits: 000, 00, 0, 1, 2.

For floor preparation and grouting of very abrasive concrete floors and for glues removal.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento

»
MT Ø100mm B 7 SEGMENTS
For Terrazzo/For Terrazzo

MT Ø100mm B 7 SEGMENTS
Metal-bond diamond disc, diameter Ø100mm, B attachment, 7 segments.

Available grits: 00,0,1,2.

For grinding Terrazzo floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Terrazzo #Graniglia

»
MT Ø140mm B 8 SEGMENTS
For Terrazzo/For Terrazzo

MT Ø140mm B 8 SEGMENTS
Metal-bond diamond disc, diameter Ø140mm, B attachment, 8 segments.

Available grits: 00,0,1,2.

For grinding Terrazzo floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Terrazzo #Graniglia

»
MW Ø140mm B
For Wood/Serie MW

cod: 140MW0B
MW Ø140mm B
Disco diamantato metallico di diametro Ø140mm, attacco di tipo B

Immagini puramente illustrative.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Legno

»
RR Ø100mm B
For Epoxy/For Epoxy

cod: 100RRB
RR Ø100mm B
Metal-bond trapezoid diamond discs Ø100mm, B attachment.

For floor preparation, applications of film-forming epoxy resins less than 1mm.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
RR Ø140mm B
For Epoxy/For Epoxy

cod: 140RRB
RR Ø140mm B
Metal-bond trapezoid diamond discs Ø140mm, B attachment.

For floor preparation, applications of film-forming epoxy resins less than 1mm.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
SSK TRAPEZOIDE (COUNTERCLOCKWISE)
For Epoxy/For Epoxy

cod: SSKTRAP
SSK TRAPEZOIDE (COUNTERCLOCKWISE)
Trapezoidal metal-bond disc with 2 polycrystalline and 2 crescent sectors for epoxy-resin removal.
- tipo di attacco: TRAP

#Levigare#Sgrossare#Cemento#Resina

»
SSK Ø100mm B
For Epoxy/For Epoxy

cod: 100SSKB
SSK Ø100mm B
Trapezoidal metal-bond disc with 2 polycrystalline and 2 crescent sectors for epoxy-resin removal.

Ø100mm, B attachment
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
SSK Ø140mm B
For Epoxy/For Epoxy

cod: 140SSKB
SSK Ø140mm B
Trapezoidal metal-bond disc with 2 polycrystalline and 2 crescent sectors for epoxy-resin removal.

Ø140mm, B attachment
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
SSK Ø140mm B TRIPLE
For Epoxy/For Epoxy

cod: 140SSK3B
SSK Ø140mm B TRIPLE
Trapezoidal metal-bond disc with 2 polycrystalline and 2 crescent sectors for epoxy-resin removal.

Ø140mm, B attachment
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
TK TRAPEZOIDE 2 SEGMENTS
For Epoxy/For Epoxy

cod: TKTRAP2
TK TRAPEZOIDE 2 SEGMENTS
Metal-bond tungsten Trapezoid with 2 segments for roughing, brushing, aging and removing paint and open the support leaving the stone visible.

#Levigare#Sgrossare#Cemento#Resina

»
TK Ø100mm B 3 SEGMENTS
For Epoxy/For Epoxy

cod: 100MTKB4S
TK Ø100mm B 3 SEGMENTS
Metal-bond tungsten Trapezoid disc for roughing, brushing, aging and removing
Paint and open the support leaving the stone visible.

Diameter Ø100mm, B attachment, 3 segments.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
TK Ø140mm B 4 SEGMENTS
For Epoxy/For Epoxy

cod: 140MTKB4S
TK Ø140mm B 4 SEGMENTS
Metal-bond tungsten Trapezoid disc for roughing, brushing, aging and removing
Paint and open the support leaving the stone visible.

Diameter Ø140mm, B attachment, 4 segments.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
TUNGXO Ø100mm B
For Epoxy/For Epoxy

cod: 100TUNG
TUNGXO Ø100mm B
Tungsten metal-bond disc diameter Ø100mm, B attachment.

Available grits: 6,10,14,24,36.

It is highly wear resistant, lasts up to 150 times longer than sandpaper and is much more effective and time-saving than traditional grinding methods.
These discs are used with grinding machines and similar machines to remove a wide range of materials on concrete and wood floors.

Can be used on paint, cement, plaster, brick, linoleum, filler, acrylic, fiberglass, carpet backing, PVC, concrete, epoxy resin, marble, carpet felt and wood.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

»
TUNGXO Ø140mm B
For Epoxy/For Epoxy

cod: 140TUNG
TUNGXO Ø140mm B
Tungsten metal-bond disc diameter Ø140mm, B attachment.

Available grits: 6,10,14,24,36.

It is highly wear resistant, lasts up to 150 times longer than sandpaper and is much more effective and time-saving than traditional grinding methods.
These discs are used with grinding machines and similar machines to remove a wide range of materials on concrete and wood floors.

Can be used on paint, cement, plaster, brick, linoleum, filler, acrylic, fiberglass, carpet backing, PVC, concrete, epoxy resin, marble, carpet felt and wood.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Sgrossare#Cemento#Resina

PAD Diamantati
»
CONCRELUX Ø430mm
Per Cemento/Serie CONCRELUX

cod: 430CONCL1
CONCRELUX Ø430mm
Pad abrasivo diamantato per cemento di diametro 17" - 430mm. Disponibile in diverse grane.
- diametro: Ø430[mm]

#Lucidare#Ripristinare#Cemento

»
MARBLELUX Ø430mm
Per Marmo/Serie MARBLELUX

cod: 430MARBL1
MARBLELUX Ø430mm

- diametro: Ø430[mm]

#Lucidare#Ripristinare#Marmo#Terrazzo #Graniglia

»
RESINLUX Ø430mm
Per Resine/Serie RESINLUX

cod: 430RESIL1
RESINLUX Ø430mm

- diametro: Ø430[mm]

#Lucidare#Ripristinare#Resina

»
TRAXOPAD Ø430mm
Multimateriali/Serie TRAXOPAD

cod: 430TRAX1
TRAXOPAD Ø430mm

- diametro: Ø430[mm]

#Lucidare#Ripristinare#Cemento#Marmo#Terrazzo #Graniglia

Resin-Bond Diamond Discs
»
FASTY YELLOW Ø140mm B
For Marble/For Marble

cod: 140FAST0YELB
FASTY YELLOW Ø140mm B
Resin-bond diamond disc, Ø140mm, B attachment.

Available grits: 0,1,2,3.

For grinding and polishing marble floors in just 3 steps, leaving a mirror-polish finish.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Lucidare#Marmo

»
FASTY Ø100mm B
For Concrete/For Concrete

cod: 100FAST0B
FASTY Ø100mm B
Resin-bond diamond disc Ø10mm, B attachment.

Available grits: 0,1,2,3.

For grinding and polishing concrete floors in just 3 steps leaving a mirror-polish finish.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Lucidare#Cemento

»
FASTY Ø140mm B
For Concrete/For Concrete

cod: 140FAST0B
FASTY Ø140mm B
Resin-bond diamond disc Ø140mm, B attachment.

Available grits: 0,1,2,3.

For grinding and polishing concrete floors in just 3 steps leaving a mirror-polish finish.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Lucidare#Cemento

»
LUXO ARANCIO Ø100mm B
For Terrazzo/For Terrazzo

cod: 100LXT0015B
LUXO ARANCIO Ø100mm B
Disco abrasivo diamantato resinoide di diametro Ø100mm, attacco di B.

Grane disponibili: 1-9.

Per pavimenti in terrazzo/palladiana.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Lucidare#Terrazzo #Graniglia

»
R SPECIAL Ø140 B
Multimateriali/Serie R SPECIAL

cod: 140R1SP
R SPECIAL Ø140 B
Resin-bond diamond disc diameter Ø140mm - 5.5", B attachment.

Sold individually or in R1-R2-R3 SPECIAL and R LUX SPECIAL kits.
R LUX SPECIAL series to be used ONLY on marble and terrazzo floors as a replacement for the POWDY SHINE diamond powder.

Ideal tool for mechanical grinding in a few steps and specific for removal of thick cement stucco and micro-thickness mastics, scratch removal and preparation of marble, Granite, concrete, terrazzo and natural stones floors without the use of polishing powders.

Tools to be used with B attachment Tools holder Ø140mm and B attachment Gear Plate Ø140mm (kit 9 pcs)
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Lucidare#Cemento#Graniglia#Granito#Marmo#Terrazzo #Graniglia

»
R SPECIAL Ø140mm VEL
Multimateriali/Multimateriali

cod: 140R1SPVEL
R SPECIAL Ø140mm VEL
Resin-bond diamond disc diameter Ø140mm - 5.5", VELCRO attachment.

Sold individually or in R1-R2-R3 SPECIAL and R LUX SPECIAL kits.
R LUX SPECIAL series to be used ONLY on marble and terrazzo floors as a replacement for the POWDY SHINE diamond powder.

Ideal tool for mechanical grinding in a few steps and specific for removal of thick cement stucco and micro-thickness mastics, scratch removal and preparation of marble, Granite, concrete, terrazzo and natural stones floors without the use of polishing powders.

Tools to be used with Tools holder Ø140mm, VELCRO B attachment plate Ø140mm and B attachment Gear Plate Ø140mm (kit 9 pcs)
- diametro: Ø140[mm]
- tipo di attacco: VELCRO

#Levigare#Lucidare

»
RG Ø100mm B
For Granite-Gres/For Granite-Gres

cod: 100RG1B
RG Ø100mm B
Resin-bond diamond disc, Ø100mm, B attachment.

Available grits: 1-9 (15-3500).

For granite floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Lucidare#Graniglia#Gres #Ceramica

»
RG Ø140mm B
For Granite-Gres/For Granite-Gres

cod: 140RG1B
RG Ø140mm B
Resin-bond diamond disc, Ø140mm, B attachment.

Available grits: 1-9 (15-3500).

For granite floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Lucidare#Graniglia#Gres #Ceramica

»
RM Ø100mm B
For Marble/For Marble

cod: 100RM1B
RM Ø100mm B
Resin-bond diamond disc Ø100mm, B attachment.

Available grits: 1-9.

For marble floor.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Lucidare#Marmo

»
RM Ø140mm B
For Marble/For Marble

cod: 140RM1B
RM Ø140mm B
Resin-bond diamond disc Ø140mm, B attachment.

Available grits: 1-9.

For marble floor.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Lucidare#Marmo

»
RT Ø100mm B
For Terrazzo/For Terrazzo

cod: 100RT1B
RT Ø100mm B
Resin-bond diamond disc Ø100mm, B attachment.

Available grits: 1-9.

For terrazzo/palladiana floors.
- diametro: Ø100[mm]
- tipo di attacco: B

#Levigare#Lucidare#Terrazzo #Graniglia

»
RT Ø140mm B
For Terrazzo/For Terrazzo

cod: 140RT1B
RT Ø140mm B
Resin-bond diamond disc Ø140mm, B attachment.

Available grits: 1-9.

For terrazzo/palladiana floors.
- diametro: Ø140[mm]
- tipo di attacco: B

#Levigare#Lucidare#Terrazzo #Graniglia

Spazzole in carburo
»
AGING BRUSH FLOOR Ø100mm B
Multimateriale/Serie AGING BRUSH FLOOR

AGING BRUSH FLOOR Ø100mm B
Spazzola in carburo di diametro Ø100mm, attacco di tipo B
- diametro: Ø100[mm]
- tipo di attacco: B

#Anticare#Cemento#Granito#Legno#Marmo#Terrazzo #Graniglia#Vinile

»
AGING BRUSH FLOOR Ø140mm B
Multimateriale/Serie AGING BRUSH FLOOR

AGING BRUSH FLOOR Ø140mm B
Spazzola in carburo di diametro Ø140mm, attacco di tipo B
- diametro: Ø140[mm]
- tipo di attacco: B

#Anticare#Cemento#Granito#Legno#Marmo#Terrazzo #Graniglia#Vinile

»
SPAZZOLA ABRASIVA Ø100mm B
Multimateriale/Serie SPAZZOLA ABRASIVA

SPAZZOLA ABRASIVA Ø100mm B

- diametro: Ø100[mm]
- tipo di attacco: B

#Cemento#Gres #Ceramica#Marmo#Pittura#Porfido#Resina#Terrazzo #Graniglia#Vinile#Lavare#Preparazione pavimento#Pulire#Ripristinare#Sgrossare

»
SPAZZOLA PARQUET Ø140mm B
Legno/Serie PARQUET

SPAZZOLA PARQUET Ø140mm B
Spazzola per parquet Ø140mm, attacco B.
- diametro: Ø140[mm]
- tipo di attacco: B

#Legno#Anticare

Spazzole in ppl
»
SPAZZOLA PPL LAVARE per SD ORBIT
Multimateriale/Serie LAVARE

cod: AC0105
SPAZZOLA PPL LAVARE per SD ORBIT
Spazzola con setole morbide adatta al lavaggio ordinario di pavimenti in ceramica, gres, marmo, granito etc. Adatta anche al lavaggio della moquette.

#Lavare#Pulire#Cemento#Granito#Gres #Ceramica#Legno#Marmo#Moquette#Pittura#Porfido#Resina#Terrazzo #Graniglia#Vinile

Steel Brushes
»
STEEL BRUSH for SD ORBIT
Multimateriale/STEEL BRUSHES Series

cod: AC0127
STEEL BRUSH for SD ORBIT
Steel brush for SD ORBIT
- diametro: Ø430[mm]

#Pulire#Sgrossare#Cemento#Colla#Granito#Gres #Ceramica#Legno#Marmo#Pittura#Porfido#Resina#Terrazzo #Graniglia#Vinile

Synthetic Magnesite Abrasive Discs
Utensili diamantati metallici trapezoidi
»
SSK TRAP
Per Resine/Serie SSK TRAP

cod: SSKTRAP
SSK TRAP
Trapezoide con 2 policristallini e due settori a mezzaluna
- tipo di attacco: TRAP

#Levigare#Sgrossare#Pittura#Resina

»
TUNGXO TRAP
Per Resine/Serie TUNGXO TRAPEZOIDE

cod: TRPTUNG
TUNGXO TRAP
Trapezoide in tungsteno disponibile in diverse grane.
- tipo di attacco: TRAP

#Levigare#Sgrossare#Pittura#Resina

P. CHIMICI
SD ORBIT FULL/SPRAY

Prodotti Chimici

Consolidanti
»
HARDYCEM
Sigillanti/Serie HARDYCEM

HARDYCEM
Consolidante e sigillante per cemento e pietre naturali. Silicato disponibile in due versioni: Sodio potassio e Lithio. Ottimo protettivo indurente che riduce la permeabilità all'acqua e aumenta la resistenza all'aggressione acida degli agenti chimici. La superficie acquista maggiore durezza e resistenza ai graffi.
Modo d'uso: prodotto concentrato, applicare a rullo o a spruzzo.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
Detergenti
»
PROOFY SOAP
Anti risalita/Serie PROOFY SOAP

cod: CP1PRSP
PROOFY SOAP
Detergente idrorepellente anti risalita. Ideale per manutenzione ordinaria su pavimenti in: marmo, pietre naturali, graniglie, graniti e cementi. Non crea antiestetici film.
Per uso domestico.

Modo d'uso:
Diluire in acqua, il prodotto può essere utilizzato manualmente con mop.

Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
ABRASIVE DISC 17" - Ø430mm cod. 430WHITE1
»
PROOFY SOAP EXTRA
Anti risalita/Serie PROOFY SOAP

cod: CP1PRSPEX
PROOFY SOAP EXTRA
Detergente idrorepellente nano-tecnologico anti risalita. Ideale per manutenzione ordinaria su pavimenti in: marmo, pietre naturali, graniglie, graniti e cementi. Non crea antiestetici film.
Per uso professionale.

Modo d'uso:
Prodotto concentrato da diluire in acqua, il prodotto può essere usato con monospazzola, lavapavimenti o manualmente con mop.

Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
ABRASIVE DISC 17" - Ø430mm cod. 430WHITE1
Lucidanti
»
GRANITE SHINE CREAM
Creme lucidanti/Serie GRANITE SHINE CREAM

cod: CP1GSCR
GRANITE SHINE CREAM
Crema lucidante per granito a base di titanio, ideale per lucidatura a specchio di graniti e gres porcellanato. Forma una pellicola protettiva contro i graffi, la polvere e la opacizzazione della superficie dovuta dall'utilizzo di detergenti troppo aggressivi. Ideale per zone ad alto traffico.

Modo d'uso:
Utilizzare con NATURPAD.

Da utilizzare con
NATURE PAD 20" - Ø500mm

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
MARBLE SHINE PINK LIQUID
Cristallizzanti/Serie MARBLE SHINE PINK LIQUID

cod: CP1MSHPL
MARBLE SHINE PINK LIQUID
Liquido cristallizzante per pavimenti in marmo, travertino e terrazzo.
Aumenta la lucentezza, dona durezza e mantiene il lucido nel tempo.
Modo d'uso:
Utilizzare con lana d'acciaio e monospazzola ad alta velocità o a doppia velocità come SD DUAL SPEED e SD ULTRA SPEED.
Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
STEEL WOOL STH PAD Ø430mm cod.
»
POWDY SHINE GRANITE
Polveri lucidanti/Serie POWDY SHINE

cod: PWGR5
POWDY SHINE GRANITE
Polvere lucidante per granito e gres.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
POWDY SHINE MARBLE STRONG
Polveri lucidanti/Serie POWDY SHINE

cod: PWB5STRONG
POWDY SHINE MARBLE STRONG
Polvere lucidante per marmi standard.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
POWDY SHINE PALLADIANA
Polveri lucidanti/Serie POWDY SHINE

cod: PWPL5
POWDY SHINE PALLADIANA

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
POWDY SHINE TERRAZZO
Polveri lucidanti/Serie POWDY SHINE

cod: PWTR5
POWDY SHINE TERRAZZO
Polvere lucidante per terrazzo, graniglia e mosaico.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
Prodotti chimici per pavimenti in legno
»
FILLY WOOD
Posa, trattamento e finitura legno/Posa, trattamento e finitura legno

cod: CPW5FILW
FILLY WOOD
Stucco all'acqua monocomponente acrilico che, miscelato con la polvere prodotta dalla levigatura del pavimento in legno, viene utilizzato per la rasatura del pavimento in legno.

Protettivi
»
LACUSTOP
Idrorepellenti anti-macchia/Serie LACUSTOP

cod: CEM1LACUS
LACUSTOP
Idrorepellente anti-macchia per cemento lucidato.

Modo d'uso:
Stendere con NATURPAD.

Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
SEALYCEM
Sigillanti anti-polvere/Serie SEALYCEM

SEALYCEM
Sigillante acrilico base acqua anti-polvere per cemento, pietre naturali e cotto. Forma un film resistente all'olio, ai grassi e al lavaggio con detergenti. Adatto ad interni ed esterni.

Modo d'uso:
Diluire in acqua, può essere utilizzato anche puro senza risciacquo.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
Protettivi lucidanti
»
LITHOCEM
Idrorepellenti/Idrorepellenti

cod: CEM1LITHO1
LITHOCEM
Idrorepellente al silicato di litio trasforma la superficie più dura e resistente. Riduce la permeabilità all'acqua, aumenta la protezione e lucentezza della superficie. Resiste ai raggi UV, all'abrasione, ai prodotti chimici e al traffico intenso.
Modo d'uso:
Prodotto da vaporizzare sulla pavimentazione e da vulcanizzare con levigatrici ad alta velocità con disco NATURPAD.
Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
LITHOCEM EXTRA
Anti-acidi/Serie LITHOCEM EXTRA

cod: CEM1LITHOCEMEXTRAV
LITHOCEM EXTRA
Protettivo lucidante anti olio. Adatto per pavimenti con pietra naturale, terrazzo e cemento. Offre protezione agli acidi come coca cola, olio, caffè, etc.
Modo d'uso:
Prodotto concentrato da utilizzare con PAD in microfibra. A fine trattamento, dopo l'asciugatura lucidare con Traxopad Shine.
Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
LITHOCEM PREMIUM WB CEMENTO E TERRAZZO al Lt
Idrorepellenti/Serie LITHOCEM

cod: CEM1LITHOPR1
LITHOCEM PREMIUM WB CEMENTO E TERRAZZO al Lt
Sigillante protettivo a base acqua per pavimenti in cemento e terrazzo, antimacchia e antiacido.
E' uno speciale sigillante a base di una miscela di silano/silossano con un ottimo effetto idrorepellente e oleorepellente.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
»
LITHORES
Idrorepellenti/Serie LITHORES

cod: CEM1LITHORS
LITHORES
LUCIDANTE PER RESINE.

Silicato ibrido altamente reattivo con una protezione integrata contro le macchie che penetra in profondità nella resine e reagisce con calce libera all'idrato di silicato di calcio.

Migliore resistenza all'abrasione, alla polvere, impermeabile e più resistenza sulla superficie dopo il trattamento con LITHORES
Migliora la densità e la durezza della pavimentazione; riduce inoltre la penetrazione di liquidi e sporcizia a differenza di densificatori convenzionali. LITHORES riduce anche la penetrazione dei cloruri e quindi migliora la superficie per una migliore resistenza al gelo e al sale antigelo. Aumenta la durata della microlevigatura.

Ideale da utilizzare dopo RESINLUX.

Modo d'uso: prodotto da vaporizzare sulla pavimentazione e da vulcanizzare con levigatrici ad alta velocità con disco NATURE PAD.
Prezzo al litro, confezione minima 5lt.

PAD ABRASIVI NECESSARI PER IL TRATTAMENTO
NATURE PAD 17" - Ø430mm cod. 430NATURE1
DOWNLOAD
SD ORBIT FULL/SPRAY

DOWNLOAD

RICHIEDI PREVENTIVO
+39 085 8562076 / +39 085 8121061
+39 329 4715858
info@lmamachine.com